DeltaMax Hydrophilic PTFE Membrane Filter adopts the imported Hydrophilic PTFE membrane, and the shell is made of polypropylene hard cage or stainless steel lining hot melt welding. With strong acid and alkali resistance, high temperature and ozone resistance, stable hydrophilicity, large circulation, uniform pore size, DeltaMax Hydrophilic PTFE Membrane is suitable for clarification and sterilization filtration of highly oxidizing liquid and highly corrosive organic solvents.
Sterile filtration of pharmaceutical chemicals
Strong acids, alkali, corrosive filtration
Microeletronic chemicals
Mineral water
Materials
Filter Media | Hydrophilic PTFE Membrane |
Inner core & Outer Cage
|
Polypropylene |
End caps
|
Polypropylene |
Gasket
|
EPDM/Silicone/Buna-N/Viton/Teflon
|
End caps type
|
DOE, SOE (222 Flat/222 Fin/226 Flat/226 Fin) |
Size
Length | 5 to 40inch |
OD | 2.75inch(69mm) |
ID | 1.3inch(33mm) |
Operation Conditions
Max. Temperature | ~85 ℃ |
Recommended DP for change-out | 2.1-2.4bar |
Flow Chart:
Hydrophilic PTFE Membrane Pleated
BDTX | -HPT | -5 | -0020 | -E | -0 | -P | -H |
Product | Material | Length | Micron Rating | O-ring | Connection | Inner Core | Surface Treatment |
DeltaMax Membrane Pleated Cartridge Filter |
HPT=Hydrophilic PTFE |
5=5inch 10=10inch 20=20inch 30=30inch 40=40inch |
0010=0.1um 0020=0.22um 0045=0.45um |
E=EPDM
S=Silicon V=Viton T=Teflon B=Buna-N |
0=DOE
1=222 Flat 2=222 Fin 3=226 Flat 4=226 Fin |
P=PP Strength Polypropylene
|
H=Hard Cage N=Netting |
1inch=25.4mm
Notice: Due to filter has variety in design, please contact with BROTHER sales for more information