DeltaMax Hydrophilic PVDF Membrane Filter adopts Hydrophilic PVDF membrane, and the shell is made of polypropylene hard cage or stainless steel lining hot melt welding. Natural Hydrophilic, uniform pore size, high porosity, strong acid and alkali resistance, low temperature creep resistance, suitable for gas sterilization and filtration.
Ophthalmics
Chemicals
Strong acid, alkaline and aggressive solvents
Biologicals Agents
Sterile filtration of gas
Materials
Filter Media | Hydrophilic PVDF Membrane |
Inner core & Outer Cage
|
Polypropylene |
End caps
|
Polypropylene |
Gasket
|
EPDM/Silicone/Buna-N/Viton/Teflon
|
End caps type
|
DOE, SOE (222 Flat/222 Fin/226 Flat/226 Fin) |
Size
Length | 5 to 40inch |
OD | 2.75inch(69mm) |
ID | 1.3inch(33mm) |
Operation Conditions
Max. Temperature | ~85 ℃ |
Recommended DP for change-out | 2.1-2.4bar |
Flow Chart:
DeltaMax Hydrophilic PVDF Membrane Pleated
BDTX | -HPV | -5 | -0020 | -E | -0 | -P | -H |
Product | Material | Length | Micron Rating | O-ring | Connection | Inner Core | Surface Treatment |
DeltaMax Membrane Pleated Cartridge Filter |
HPV=Hydrophilic PVDF |
5=5inch 10=10inch 20=20inch 30=30inch 40=40inch |
0020=0.22um 0045=0.45um 0080=0.8um 00100=1um |
E=EPDM
S=Silicon V=Viton T=Teflon B=Buna-N |
0=DOE
1=222 Flat 2=222 Fin 3=226 Flat 4=226 Fin |
P=PP Strength Polypropylene |
H=Hard Cage N=Netting |
1inch=25.4mm
Notice: Due to filter has variety in design, please contact with BROTHER sales for more information