DeltaMax Hydrophobic PVDF Membrane Filter

Description

DeltaMax Hydrophobic PVDF Membrane Filter adopts Hydrophobic PVDF membrane, and the shell is made of polypropylene hard cage or stainless steel lining hot melt welding. Natural Hydrophobic, uniform pore size, high porosity, strong acid and alkali resistance, low temperature creep resistance, suitable for gas sterilization and filtration.

 

Products Features of DeltaMax Hydrophobic PVDF Membrane Filter

  • Hydrophobic PVDF membrane for gas&solvents sterile filtration
  • Absolute rated with retention ratings ≧99.99%
  • Wide chemical compatibility
  • High filtration efficiency and high-efficiency reduction of fine particulate
  • High flow rate, low-pressure loss, long service life
  • 100% integrity tested

 

Applications of DeltaMax Hydrophobic PVDF Membrane Filter

Filtration of compressed air
Tank vent
Sterile filtration of gas
Fine chemicals
Air filtration for aseptically packaged

More Description

Materials

Filter Media Hydrophobic PVDF Membrane
Inner core & Outer Cage

 

Polypropylene
End caps

 

Polypropylene
Gasket

 

EPDM/Silicone/Buna-N/Viton/Teflon

 

End caps type

 

DOE, SOE (222 Flat/222 Fin/226 Flat/226 Fin)

 

Size

Length 5 to 40inch
OD 2.75inch(69mm)
ID 1.3inch(33mm)

 

Operation Conditions

Max. Temperature ~85 ℃
Recommended DP for change-out 2.1-2.4bar


Flow Chart:

DeltaMax Hydrophobic PVDF Membrane Pleated

DeltaMax Hydrophobic PVDF Membrane Pleated

BDTX -PV -5 -0020 -E -0 -P -H
Product Material Length Micron Rating O-ring Connection Inner Core Surface Treatment
 

DeltaMax  Membrane Pleated Cartridge Filter

 

PV=Hydrophobic PVDF

 

5=5inch

10=10inch 20=20inch 30=30inch 40=40inch

 

 

 

0020=0.22um

0045=0.45um

00100=1um

E=EPDM

S=Silicon V=Viton T=Teflon B=Buna-N

0=DOE

1=222 Flat

2=222 Fin

3=226 Flat

4=226 Fin

 

 

P=PP Strength Polypropylene

 

H=Hard Cage N=Netting

 

1inch=25.4mm

Notice: Due to filter has variety in design, please contact with BROTHER sales for more information