DeltaMax Hydrophobic PTFE Membrane Filter

Description

DeltaMax Hydrophobic PTFE Membrane Filter adopts imported Hydrophilic PTFE membrane, and the shell is made of polypropylene hard cage or stainless steel lining hot melt welding. Natural hydrophobic, uniform pore size, high porosity, strong acid and alkali resistance, low temperature creep resistance, suitable for gas sterilization and filtration.

 

Features of Hydrophobic PTFE Membrane Filte

  • Hydrophobic PTFE membrane wthout pre-wetting
  • Absolute rated with retention ratings ≧99.99%
  • Superior chemical compatibility
  • High filtration efficiency and high efficiency reduction of fine particulate
  • High flow rate,low pressure loss, long service life
  • 100% integrity tested

 

Applications of DeltaMax Hydrophobic PTFE Membrane Filte

Compressed gas sterile filtration
Air filtration in aseptic package
Autoclave vent filters
Electronic graded solvents
Hot deionized water(<80°C)

More Description

Materials

Filter Media Hydrophobic PTFE Membrane
Inner core & Outer Cage

 

Polypropylene
End caps

 

Polypropylene
Gasket

 

EPDM/Silicone/Buna-N/Viton/Teflon

 

End caps type

 

DOE, SOE (222 Flat/222 Fin/226 Flat/226 Fin)

 

Size

Length 5 to 40inch
OD 2.75inch(69mm)
ID 1.3inch(33mm)

 

Operation Conditions

Max. Temperature ~85 ℃
Recommended DP for change-out 2.1-2.4bar


Flow Chart:

Hydrophobic PTFE Membrane Pleated

Hydrophobic PTFE Membrane Pleated

BDTX -PT -5 -0020 -E -0 -P -H
Product Material Length Micron Rating O-ring Connection Inner Core Surface Treatment
 

DeltaMax  Membrane Pleated Cartridge Filter

 

PT=Hydrophobic PTFE

 

5=5inch

10=10inch 20=20inch 30=30inch 40=40inch

 

 

 

0010=0.1um

0020=0.22um

0045=0.45um

E=EPDM

S=Silicon V=Viton T=Teflon B=Buna-N

0=DOE

1=222 Flat

2=222 Fin

3=226 Flat

4=226 Fin

 

P=PP Strength Polypropylene

S=SUS 304

U=SUS 316

 

H=Hard Cage N=Netting

 

1inch=25.4mm
Notice: Due to filter has variety in design, please contact with BROTHER sales for more information