Metalman Titanium Cartridge Filter


An effective solid-liquid separation cartridge made of more than 99.4% high purity titanium structure.

What is a metal filter cartridge?

Metal filter cartridges are used in instances where conventional filters are insufficient. This situation may be caused by high temperatures, high pressures, corrosive chemicals, or the necessity to clean and reuse the cartridge. Titanium is occasionally utilized in addition to 316/304 stainless steel as the primary material of the metal filter cartridge.

Brother Filtration introduced a new range named Metalman in the summer of 2022. To meet all kinds of unique filtration requirements, The Metalman comes with a number of unusual metal cartridges. We use titanium in addition to premium stainless steel, and we think these new goods will capture your attention.

What is Metalman Titanium Cartridge Filter?

Metalman Titanium Cartridge Filter(TCF) is an effective solid-liquid separation cartridge made of more than 99.4% high purity titanium structure. Due to its broad chemical compatibility, Metalman TCF can be used for the filtration of most liquids. TCF has a very good solid-liquid separation effect on low viscosity liquid with rigid particles. Best results are achieved when used in combination with a titanium rod filter.

With its all-high purity titanium construction, Brother Filtration TCF has no particle migration and resistance to temperature, corrosion, and oxidation. The TCF has high porosity which results in low-pressure drop and high permeability. Also, the structure of TCF is uniform, the pore size distribution is narrow and the separation ratio is high.

Additionally, the TCF can operate at 280℃, which is a hard task for a conventional filter cartridge. With all these outstanding advantages mentioned above, Brother Filtration TCF is suitable for applications such as decarbonization and filtration of liquids, chemical reagents, ozonated water filtration, steam filtration, etc.


The newly launched metalman series is very durable and practical, the titanium cartridge filter is made of a high purity titanium structure, equipped with high quality, and able to withstand many extreme conditions.

  • The fully high purity titanium structure
  • No particles migration
  • Resistance to corrosion, oxidation, and extreme temperatures
  • Optional cap nut materials
  • All sintered titanium
  • Mean pore size and uniform structure

The metal filter cartridge is a durable and outstanding cartridge. Especially Brother Filtration TCF, the all-sintered high titanium construction makes it so powerful, and able to handle tough conditions.

  • High porosity
  • High permeability
  • Low-pressure drop
  • High separation efficiency
  • Durable compared to conventional filter


Filter Material Sintered titanium powder
Center rod/housing/port Sintered titanium powder
Cap Stainless steels 304 ( Titanium available)


Retention rate

Particle range 0.45um 1um 3um 5um 10um
≥2um 99.916% 99.985% 99.769% 82.546% 82.371%
≥5um 99.974% 99.965% 99.910% 96.283% 96.079%
≥10um 99.990% 99.986% 99.973% 98.875% 98.982%
≥12um 99.987% 100.000% 99.986% 98.998% 98.928%
≥25um 100.000% 100.000% 100.000% 99.996%% 99.916%
≥35um 100.000% 100.000% 100.000% 100.000% 99.966%
≥50um 100.000% 100.000% 100.000% 100.000% 100.000%


Length Filtration are
5inch (127mm) 0.024m2
10inch (254mm) 0.056m2
20inch (508mm) 0.094m2
30inch (762mm) 0.141m2
40inch(1016mm) 0.188m2


Model Liquid accuracy(UM) Initial DP(Kpa) Porosity(%) Absolute accuracy(um) Average permeability(L/dm2 min) Liquid flow rate (m3/h)
1 0.45 32 30-50% 6 0.02 0.18
2 1 25 30-50% 10 0.1 0.27
3 3.0 6.1 30-50% 20 0.5 0.33
4 5.0 3.2 30-50% 30 1.1 1.32
5 10 3.0 30-50% 50 2.7 4.2
6 20 2.8 30-50% 70 5.6 5.6


Operation condition

Max temperature ~280℃
Max DP 3.0 Bar

Order Information

Outer diameter Diameter Filtration accuracy Cartridge interface Cartridge size Seals
TCF=Titanium Cartridge filter D60=φ60mm 0045=0.45um E2=Flat pressure 05=5inch S= Silicone Rubber(Silicone)standard
/ 0100=1.0um E4=222 Flush type 10=10inch E= Ternary Ethylene Propylene(EPDM)
/ 0300=3.0um E7=226 Pointed type 20=20inch V= Fluorine rubber(VITON)
/ 0500=5.0um E8=1” Male NPT 30=30inch /
/ 1000=10um E9=1” Female NPT 40=40inch /
/ 2000=20um / / /
/ 3000=30um / / /
/ 5000=50um / / /
/ 8000=80um / / /
/ 100H=100um / / /
/ 120H=120um / / /
Enquiry Now



Get E-Book Now

Have Questions?

Get in Touch

error: Content is protected !!