PP Melt blown water filter1

Melt blown Filter is the most widely used filtration consumable products in domestic and industrial water treatment projects. The PP ,melt blown filter cartridges are constructed by 100% pure virgin polyproprlyene fiber, providing brode wide chemical competibility. With innovated graded pore structure, it can provide effective particle retention.

 

We Brother Filtration utilizes 3 layered construction for progressive contaminant removal efficiency. Our filter media contains no binder, glue or any other additives, just pure PP structure. With years of experience, we are able to custom for you special PP melt blow cartridges filters with varied specifications like groove, orange peel and hairy surface finish or equipped with different SOE/DOE end caps.

 

For Melt Blown Filter, we Brother Filtration usually could offer the removing ratings of 1, 3, 5, 10, 20, 30, 50, 100um.

 

The outer diameter is 63mm or 113mm. The inner diameter is 28mm or 30mm. The length usually is from 10 inch to 70 inch.

 

The o-ring is made up of silicon, EPDM, Viton, Nitrile. If the liquid is strong acid and alkali, the O-ring should made with Viton, which could avoid the acid and alkali to get chemical reaction. If the liquid is oil kind, the O-ring should use of Nitrile.

 

For Melt Blown Filter, there are two kinds for the ends , one is double open end(DOE), the other one is single open end. For the second one, the both ends could made up of 4 kinds, which are 222/flat, 226/flat, 222/fin, 226/fin.

 

The benefits of Melt Blown Filter.

  1. Center core for strength.
  2. High flow rates.
  3. Low pressure drop.
  4. High dirt-holding-capacity.
  5. Fixed-pore-structure retains trapped debris.
  6. Broad chemical compatibility.
  7. Controlled process parameters- consistent product.

 

The mainly applications of PP Melt Blown Filters.

  1. General water treatment.
  2. Food and beverage.
  3. Chemicals.
  4. Drinking water.
  5. Sea water desalination.
  6. Pri- Filtration of RO/DI

 

PP melt blown filter cartridge or PP spun water filter, PP filter, PP filter cartridge is the most widely used filtration consumable products in domestic and industrial water treatment projects. The PP melt blown filter cartridges are constructed by 100% pure virgin polypropylene fiber, providing broad wide chemical compatibility. With innovated graded pore structure, it can provide effective particle retention.

Brother Filtration PP spun water filter contains no binder, glue or any other additives, just pure PP structure. With years of experience, we are able to custom for you special PP melt blown cartridge filters with varied specifications like groove, orange peel and hairy surface finish or equipped with different SOE/DOE end caps.