High flow filtration is required by many applications such as desalination, petrochemicals, and oil&gas industry, which means they need to handle large quantities of liquids. A high-flow filter is the best choice for them. Excellent industrial water filtration advantages are offered by high-flow filter cartridge housings for a variety of applications.

There are horizontal and vertical mounting options for our high-flow filter housings, the horizontal design minimizes system space while maximizing simplicity of operation and change-out. Obviously, the FRP-X filter housing is a horizontal filter housing.

Just like other high-flow filter housing produced by Brother Filtration, FRP-X is also suitable for all high-flow filter cartridges and can be matched with Max-A(Pall Ultipleat equivalent) or Max-T (Pentair Aqualine equivalent) to reach a perfect filtration performance.

Compared to the other filter housing, Brother Filtration uses a sealed clamp-type end design to reduce leakage. Additionally, when workers change the filter cartridge inside the housing, the clamp type is easier to open and helps to reduce the maintenance time. Also, adopting a clamp type can effectively avoid the stuck-in problem of the housing handle end up.

It is not only easy to open the end cap, but also easier to install. Workers can do quick change-out without dismounting the pipeline. It can reduce labour costs and reduce the downtime of equipment, to some extent, can improve efficiency.

With proper and modular design, FRP-X Filter Housing has a small footprint and is compact and mobile. The FRP-X Filter Housing has ultra-high resistance to corrosion and can match with FRP membrane vessels, which is the perfect solution for seawater treatment that needs a large capacity.

In addition to what was mentioned above, the FRP-X Filter Housing is also a good solution for industries such as prefiltration for RO systems, oil & gas, desalination, petrochemicals, food & beverage, and pulp & paper.


The horizontal FRP-X Filter Housing has small footprint with large capacity, is a outstanding and superior new trend high flow filter housing. Brother Filtration designs and manufactures it with care, we really take the problem of operation into consideration.

  • Suitable for high-flow cartridge filters
  • Modular design, smaller footprint, compact and mobile.
  • Matched with Max-A (Pall Ultipleat equivalent) or Max-T (Pentair Aqualine equivalent)
  • Clamp opening better avoiding housing handle end cap ‘’sucked in’’ problem
  • Perfectly matched with FRP membrane vessels

Better sealed performance makes better filtration performance. Brother Filtration FRP-X Filter Housing is a perfect housing for large capacity and high flow, with a strong resistance to corrosion, it can be applied to seawater treatment. We believe our customers are surprised by its ability.

  • Easy installation, quick change-out without dismounting pipeline
  • Ultra-high strength of corrosion resistance, a perfect option for seawater
  • High efficiency with large capacity
  • Better sealed performance reduces the risk of leakage

Material of constructions

Shell FRP
Design pressure 150psi (standard)
Connections Standard inlet/outlet 3” couplings


FRP Housing clamp type benefits over the normal type

Clamp Type Normal Type
Opening Type Quicker Clamp opening locking segment + Screw
Design pressure 10bar 10bar
Handle Humanized design Humanized design
Cost Clamp type Save XX% than normal type as products size and structure optimization



Max-A Series High Flow
Max-A Series High Flow 1: Vessel Shell 9: Strap
2: Bolt 10: Strap screw
3: Nut 11: Saddle
4: Clamp 12: Side port
5: Inlet end cap 13: Guiding ring
6: Thrust ring 14: DN 80 Coupling
7: Seal oring 15: DN 80 Short pipe
8: End cap
Max-T Series High Flow
Max-T Series High Flow 1: Vessel Shell 8: Strap
2: Bolt 9: Strap screw
3: Nut 10: Saddle
4: Clamp 11: Side port
5: Outlet end cap 12: DN 80 Coupling
6: Seal oring 13: DN 80 Short pipe
7: End cap 14: Connection part

Order Information

MFC -A -40 -S -10 -N
Model Series Length Connection Design Pressure Side Port Material
FRP High
Flow Cartridge
A=Max-A Series High Flow
T=Max-T Series High Flow
20=20inch  (508mm)
40=40inch (1016mm)
60=60inch (1524mm)
S=Side Port 10=10bar N=Nylon
Notice: Due to housing has variety in design, please contact BROTHER sales for more information
Enquiry Now



Get E-Book Now

Have Questions?

Get in Touch

error: Content is protected !!