Max A - Pall Ultipleat High Flow Water Filter Cartridge Replacement


Max A is Pall Ultipleat High Flow Water Filter Cartridge Replacement. Max A series high flow filter cartridge is made of 100% polypropylene melt media. Unlike original Pall Ultipleat series’ outer soft netting, Max A high flow filter cartridges make use of rigid hard cage as outer case. The strong hard cage enables the high flow water filters to undertake larger operation pressure during filtration process.

And as a pleated water filter cartridge with optimized membrane structure, better filtration precision and efficiency can be offered by Max A series. In the pre-filtration process of reverse osmosis membrane filtration, Max A high flow filter provides better protection for RO membrane than melt blown and string wound sediment filter cartridges.

If further project parameters offered to Brother Filtration, we are glad to customize the special Pall Ultipleat High Flow filter cartridge substitute for your only use. Longer service life and better filtered water quality can be achieved by our OEM/ODM services.

Features of Max A Pall Ultipleat High Flow Water Filter replacement

  1. Large water flow capacity in one high flow filter element, max is 113 m3/h
  2. Large filter outer diameter for high flow, 6inch (152mm)
  3. Graded filtration pore sizes in one high flow filter element
  4. Multi membrane layers for large dirt holding in the high flow filter elements
  5. Thermally bonded construction for stronger pressure resistance
  6. In-Out water flow direction to block the contaminants inside the pleated filter

Advantages of Max A Pall Ultipleat High Flow Water Filter equivalent

  1. Less filter elements quantity in need
  2. Smaller installation footprint
  3. Easier and quicker installation & change out
  4. Less labor needed and lower operation & maintenance cost

Applications of Max A Pall Ultipleat High Flow Water Filter equivalent

  1. Power Condensate System
  2. Municipal Water
  3. Chemical
  4. Petrochemicals
  5. Electronics (RO Pre-Filtration, Process Water)
  6. Food & Beverage (process Water)
  7. Pharmaceutical (process water)
  8. Waste Water

More Description

Retention Rating1,3,5,10,20,40um

and others available

Recommended Change-Out

Differentical Pressure

2.1 Bar @ 20℃
Outer Dimension6’’ (152mm)Maximum Flow Rate40’’ (1016mm) 78m3/h

60’’(1524mm) 113m3/h

Length40’’ (1016mm); 60’’ (1524mm)Core/CagePolypropylene
Max Operating


80℃ (High Temperature

Requirement is available)

OutsideRigid Hard Cage (Standard)

Netting/Stainless Steel (Available)

O-ringEPDM/VITONFilter MediaMulti-media POlypropylene

high flow rate vs differential pressure




Flow Rate

Recommended Change Out Pressure Drop
MAHF-P-010-40-E40inch1.0 MicronPolypropylene

Micron Fiber Media

78m3/h2.1 Bar @ 20℃
MAHF-P-030-40-E40inch3.0 MicronPolypropylene

Micron Fiber Media

78m3/h2.1 Bar @ 20℃
MAHF-P-050-40-E40inch5.0 MicronPolypropylene

Micron Fiber Media

78m3/h2.1 Bar @ 20℃
MAHF-P-100-40-E40inch10.0 MicronPolypropylene

Micron Fiber Media

78m3/h2.1 Bar @ 20℃
MAHF-P-200-40-E40inch20.0 MicronPolypropylene

Micron Fiber Media

78m3/h2.1 Bar @ 20℃
MAHF-P-400-40-E40inch40.0 MicronPolypropylene

Micron Fiber Media

78m3/h2.1 Bar @ 20℃
MAHF-P-010-60-E60inch1.0 MicronPolypropylene

Micron Fiber Media

78m3/h2.1 Bar @ 20℃
MAHF-P-030-60-E60inch3.0 MicronPolypropylene

Micron Fiber Media

113m3/h2.1 Bar @ 20℃
MAHF-P-050-60-E60inch5.0 MicronPolypropylene

Micron Fiber Media

113m3/h2.1 Bar @ 20℃
MAHF-P-100-60-E60inch10.0 MicronPolypropylene

Micron Fiber Media

113m3/h2.1 Bar @ 20℃
MAHF-P-200-60-E60inch20.0 MicronPolypropylene

Micron Fiber Media

113m3/h2.1 Bar @ 20℃
MAHF-P-400-60-E60inch40.0 MicronPolypropylene

Micron Fiber Media

113m3/h2.1 Bar @ 20℃