Knowledge

With the development of filtration technology and increasing demands for filtration, there are more and more cartridge filters on the market, especially high-flow cartridge filter. The high flow cartridge filter is designed for the large water capacity and high flow rate, which is needed by many different industries.

5 best high flow cartridge filter in China

Those high-flow cartridge filters vary in brands, series, and prices, which make it difficult for customers to make decision.

For convenience, many customers just pick high-flow cartridge filters from famous brands such as 3M, Pentair, and Parker, which are to some extent effective. However, it also brings high costs for filtration.

So, we would like to recommend 5 different high-flow cartridge filters from China, that have the same filtration ability at a competitive price.

Max-A high flow cartridge filter

Max-A high flow cartridge filter is a perfect replacement for Pall Ultipleat High Flow Water Filter Cartridge. Max-A series high flow filter cartridge is made of 100% polypropylene melt media and a rigid hard cage as an outer case.

The strong hard cage enables the high flow water filters to undertake larger operation pressure during the filtration process. And as a pleated water filter cartridge with an optimized membrane structure, better filtration precision, and efficiency can be offered by Max A series.

Max-A-high-flow-cartridge-filter

Materials

  • Filter Media: Polypropylene / Glass Fiber
  • Outer cage & End caps: Polypropylene
  • Gasket:EPDM / Silicone / Buna-N / Viton

 Size

  • Length:60/40/20inch
  • Outside Diameter: 6inch(152mm)
  • Filtration Area: 8 ㎡ @60inch, 5.3 ㎡ @40inch

Operation Conditions

  • Max. Temperature: ~70℃
  • Recommended Differential Pressure for change-out: 1.8-2.1bar

Advantages

  • Membrane pleated structure provides a large filtration surface
  • Inside-outside flow direction provides excellent dirt-holding capacity
  • Low cost, high efficiency
  • Appropriate design results in faster and easier cartridge filter change-out
  • Wide range of application

Max-Iron high flow cartridge filter

Max-Iron high flow cartridge filter is a perfect replacement for PECO XstreamPure. It is designed for extreme conditions. The outer metal cage of Max-Iron makes high-pressure application possible, and the outer cage protects the pleated filter media at the same time. The inner core of Max-Iron also has a strong mechanical strength, which helps it get through the high pressure.

Max-Iron-High-Flow-Cartridge-Filter

Material & Operation Conditions

Type Filter Media End Caps Outer Cage Max.Temperature Max. Pressure
Drop
Recommended Differential Pressure for Change-out
High-Pressure Application Polypropylene Polypropylene injected glass
fiber
SS316L or SS304 80℃ 4.5Bar@21℃ 2.1 Bar
High-Temperature Application Glass Fiber Nylon 130℃

Size

  • Length:60/40/20inch
  • Outside Diameter: 6inch(152mm)
  • Filtration Area: 8 ㎡ @60inch, 5.3 ㎡ @40inch

Advantages

  • Easy installation and quick change-out
  • Multiple pleated layers construction, filtration direction in-out
  • Fewer elements in need, costs-saving
  • The outer metal cage makes high-pressure application possible
  • Perfect performance of depth media for high dirt holding

Max-K high flow cartridge filter

Max-K high flow cartridge filter is a perfect replacement for the Parker High Flow water filter cartridge. For high flow applications where high particle removal is required, Max-K cartridges are the best option.

Max-K high flow water filter cartridges include two types of end caps: single o-ring end cap and double o-ring end cap for Megaflow old and new models.

Max-K-High-Flow-Cartridge-Filter

Materials

  • Filter Media: Polypropylene
  • Outer cage & End caps: Polypropylene
  • Gasket:EPDM / Silicone / Buna-N / Viton

Size

  • Length:40inch
  • Outside Diameter: 6inch(152mm)
  • Filtration Area:5.6㎡

Operation Conditions

  • Max. Temperature: ~70℃
  • Recommended Differential Pressure for change-out: 0.8-1.2bar

Advantages

  • High flow rate up to 70m³/hr
  • Ultra lower differential pressure, saving O&M costs
  • The proper design makes change-out fast, easy, and safe
  • Inner core for high mechanical strength, outer sleeve to protect the pleated media
  • Wide range of chemical compatibility

Max-T high flow cartridge filter

Max-T high flow cartridge filter is a perfect replacement for Pentair Aqualine High Flow Water Filter Cartridge. It is perfectly fitting with the original Pentair Aqualine High Flow filter cartridges FRP housing. The Max-T pleated high-flow cartridge filter is equipped with high-quality melt-blown polypropylene membrane media.

Max-T-High-Flow-Cartridge-Filter

Materials

  • Filter Media: Polypropylene
  • Outer cage & End caps: Polypropylene
  • Gasket:EPDM / Silicone / Buna-N / Viton

Size

  • Length:60/40inch
  • Outside Diameter: 6.75inch
  • Filtration Area:13.8 ㎡ @60inch,9.2 ㎡ @40inch

Operation Conditions

  • Max. Temperature: ~70℃
  • Recommended Differential Pressure for change-out: 1.8-2.1bar

Advantages

  • 75inch outer diameter provides a superior flow rate of up to 113m³/hr
  • Pentair Aqualine replacement
  • Inner PP core for high mechanical strength
  • Multiple pleated layers construction
  • Wide range of chemical compatibility
  • Labor-saving & quick change design & smaller foot space

Max-Z high flow cartridge filter

Max-Z high flow cartridge filter is a perfect replacement for the Amazon FFC series. It is developed to suit large-scale processes which require higher and better performance. This large diameter pleated filter cartridges are manufactured from either polypropylene or glass fiber depth media.

MAX-Z-high-flow-cartridge-filter

Materials

  • Filter Media: Polypropylene / Glass Fiber
  • Outer cage & End caps: Polypropylene
  • Gasket:EPDM / Silicone / Buna-N / Viton

Size

  • Length:60/40inch
  • Outside Diameter: 6inch(152mm)
  • Filtration Area:7.9 ㎡ @60inch, 5.3 ㎡ @40inch

Operation Conditions

  • Max. Temperature: ~70℃
  • Recommended Differential Pressure for change-out: 1.8-2.1bar

Advantages

  • Multiple pleated layers construction
  • High filtration area up to 7.9 ㎡
  • High flow rate up to 113m³/hr(500GPM)
  • Nominal & Absolute options
  • Easy installation and quick change-out

Conclusion

High flow cartridge is a new trend product, aiming to fulfill the increasing needs for large water capacity. There are plenty of different types of high-flow cartridge filters in the market, some of them are from famous brands, and some of them can offer lower prices. These lead to difficulty for customers, they don’t know whether they are good products.

Brother Filtration has been deeply involved in the filtration industry, years of experience and advanced technology enable Brother Filtration to design and manufacture various high-quality products, especially the high-flow cartridge filters.

If you have further questions about those high-flow cartridge filters or any problems with filtration, please feel free to contact us, and we will try our best to solve your problem.

Have Questions?

Get in Touch

error: Content is protected !!