Ultra H High Flow Filter Cartridge

Description

Ultra H High Flow Filter Cartridge is a complete replacement of 3M Cuno High Flow water filter cartridge from Brother Filtration. 3M Cuno 7000 and 740B high flow water filter elements are both replaceable by Ultra H high flow filter cartridges. Radial and diamond shaped pleats are the same as the original design of 3M Cuno high flow cartridge filters. The special form of pleats standouts Ultra H high flow water filters among all the vertical pleated high flow water cartridge filters.

As the only qualified supplier of 3M Cuno High Flow water filter cartridges equivalent in China, Brother Filtration pays more attention to the filter elements filtration performance instead of only the radial out looking. Good quality membrane and scientifically designed structure make Ultra H a very competitive option in the market.

Higher dirt holding capacity and longer service life, with further specifications of your large industrial water plant projects, Brother Filtration promises to offer you an over- satisfied pre-filtration engineering solution via Ultra H filter cartridges.

 

Features of Ultra H High Flow Filter Cartridge

  • Special radial pleated design
  • Superior filtration area up to 18㎡
  • Ultra high flow rate up to 113m³/hr (500GPM)
  • High dirt holding capacity for long life and lower cost
  • Broad chemical compatibility for different applications
  • Convenient handle for easy change-out
  • Nominally rated with retention ratings between 1-100µm at 90-95% efficiencies
  • Absolute rated with retention ratings between 1-20µm at 98-99.9% efficiencies
  • Silicone free construction
  • Polypropylene materials in compliance with FDA regulations for food contact under CFR21.

 

Advantages of Ultra H High Flow Filter Cartridge

  1. Large water capacity up to 500 GPM;
  2. Highly surface area to 20 m3;
  3. Smaller installation place;
  4. Easy and quick change-out;
  5. Lower cost for operation and maintenance.

 

Applications of Ultra H High Flow Filter Cartridge

  1. Municipal Water
  2. RO Pre-Filtration
  3. Reclaimed Water
  4. Coolants
  5. Boiler Condensate
  6. Electronics Process Water
  7. Pharmaceutical

 

Technical Data of Ultra H High Flow Filter Cartridge

Materials
Filter Media & Straps Polypropylene
Inner core& End Cap Polypropylene
O-ring EPDM/Buna N/Silicon/Viton
Size
Length 20/40/60inch
OD 6.5inch
Operation conditions
Max. Temperature ~80 ℃
Recommended DP for change-out 2.1-2.4bar
Filtration area 18㎡@60inch, 12㎡@40inch

 

Flow Rate of Ultra H High Flow Filter Cartridge

Max Flow Rate Recommended Flow Rate
60inch 113m³/[email protected] 65m³/[email protected]
40inch 80m³/[email protected] 38m³/[email protected]

 

Flow Rate of Ultra H High Flow Filter Cartridge

 

Ordering Information of Ultra H High Flow Filter Cartridge

BUFH -PP -20 -N -0100 -E -D
Model Media Material Length Filtration Efficency Micron Rating O-ring No. of Oring
Ultra-H High Flow Filter Cartridge PP=Polypropylene
GF=Glass Fiber
10=10inch

20=20inch
30=30inch
40=40inch
60=60inch

N=Nominal        A=Absolute(1-20um) 0100=1um
0500=5um
1000=10um
1500=15um
2000=20um
4000=40um
7000=70um
10000=100um
E=EPDM
S=Silicon
V=Viton
B=Buna-N
D=Double Insert Oring
S=Single Insert Oring

 

1 inch =25.4 mm
Notice: Due to the filter has variety in design, please contact BROTHER sales for more information

 

Housing Options of Ultra H High Flow Filter Cartridge

Phasic Cartridge Housing

Phasic Cartridge Housing

Ultra H Classic High Flow Cartridge Housing

Ultra H Classic High Flow Cartridge Housing

 

 

 

 

More Description